These heavy-duty globe/angle valves, designed primarily for commercial applications, offer superior performance and durability under the most demanding conditions. Tracing its origin back to the highly popular Century Series, the 100 Series (Century PLUS) delivers reliable performance with a host of enhanced features.

100P1

• 200 psi rating
• Manual internal bleed
• Manual external bleed (flush mode)
• Flow control allows precise flow adjustment and manual shut-off
• Tough, glass-reinforced nylon, stainless steel and brass construction withstands high temperatures and system surges under pressure
• Rugged, double-beaded, nylon-reinforced Buna-N diaphragm provides leak-proof seal
• Buna-N valve seat seal
• Stainless steel metering (externally removable)
• Encapsulated injection-molded solenoid
• Captive hex plunger
• Positive O-ring seal on inlet plug prevents leaks without damaging seal threads
• Molded-in and anchored studs allow positive bonnet attachment and removal
• Brass flow control stem (2- and 3-inch models)
• Easily serviced without removal from the system
• Accepts OmniReg ^TM modular pressure regulator

Pressure Regulation Option (OmniRegT modular option)

• Electric or manual operation
• Pressure setting dial
• Self-modulating pressure regulator maintains constant downstream pressure within ñ 3 psi of pressure setting
• Outlet pressure regulating range from 5-100 psi or 5-30 psi with Schrader valve test port (SPK-100 and SPK-30 gauges optional)
• Retrofits in less than one minute
• Inlet pressure must be 10 psi greater than desired outlet pressure
• Not compatible with 102 model.

Anti-Contamination (102 models)

• Electric valves with 150-mesh external control water filter and three-way solenoid
• Non-continuous metering system for dirty or effluent water applications
• Small exchange of control water allows minimum filter capacity
• Control water filter allows easy external service
• Selectable normally open or normally closed mode (factory set at normally closed)
• Not compatible with OmniReg ^TM modular pressure regulator
• Not compatible with E2002
• DC latching solenoid

  
  100P2
  (Shown with OmniRegT modular option)

100P3

Operating Specifications

• Flow range: 5-300 GPM
• Pressure range: 10-200 psi; 10-100 psi (102 models)

Electrical Specification

• Solenoid: 24 VAC
• Inrush volt-amp: 24 VAC-11.50 VA
• Inrush current: .4 amp (102 models: .48 amp)
• Holding volt-amp: 24 VAC-5.75 VA
• Holding current; .2 amp (102 models: .24 amp)

Optional Accessories

• OmniReg ^TM 5-100 psi regulator (OMR-100)
• OmniReg ^TM 5-30 psi regulator (OMR-30)
• Weatherproof gauge (SPK-100)
• Weatherproof gauge (SPK-30)
• Hydraulic conversion kit (HVC-Kit)
• Reclaimed water kit (RW60-Kit); purple solenoid with purple warning tag
• DC latching solenoid (E2002) Note: Maximum pressure for a valve that utilizes E2002 latching solenoid is 120 psi.

Dimensions
100-P1

• Height: 6 ó"
  
• Width: 3 5/8"
  
• Length: 4 ó"

100-P1.5

• Height: 7 ¬"
  
• Width: 3 5/8"
  
• Length: 4 ó"

100-P2

• Height: 9 «"
  
• Width: 6 1/8"
  
• Length: 7 ó"

100-P3

• Height: 10 ó"
  
• Width: 6 1/8"
  
• Length: 8 ¬"